R-700

คุณสมบัติสินค้า:

เพิ่มรายการโปรด

เปรียบเทียบ

แบรนด์ : TOKYO KEISO

Features

Alarm contact provided
- In addition to flow indication, alarm contact is provided.
Easy installation
- No straight runs both for upstream and downstream are required for process installation. No utility supply is needed.
Cost effectiveness
- The pure mechanical construction offers most cost effective flowmeasurement.
Direct observation of measuring liquid
- In addition to flow rate measurement, the measurement fluids are directly observed for better process fluid quality control.
Wide material selection
- Besides the standard metallic material, resins and/or lining materials are available for corrosive fluids.

Short Specifications

Measuring fluid	Liquids and gases
Flow range	Liquids: Water at density1.0g/cm³, viscosity 1.0 mPa·s Max. 8 to 80 m³/h Min. 6.5 to 65 L/h Gases: Air at 0°C, 0MPa Max. 16 to 160 m³/h(nor) Min. 0.21 to 2.1 m³/h(nor) *Depending on the fluid and the float material
Availabe size	10A to 100A
Fluid Pressure	Differs on sizes (Typical figure, refer to Technical Guidance for details) 10A: 1.2MPa 15A: 1.0MPa 20A, 25A: 0.8MPa 40A, 50A, 65A: 0.6MPa 80A, 100A: 0.4MPa
Fluid Temperature	Max.120°C (Subject to material) Allowable thermal shock: 80°C
Process Connection	Std: JIS10KFF Flange Option: JIS5KFF(RF), JIS10KRF, ANSI#150 Flange
Material	Body: FC200, SCS13, SCS14 (Option: PVC) Tapered tube: Heat-resistant glass Float: Liquids: SUS304 (Option: SUS316, SUS316L, PTFE) Gases: Aluminium Seal: Std. NBR (Option: FPM, PTFE)
Range ability	Std. 10 : 1
Indication Accuracy	Std. ± 1.5%F.S. (Resin float version: ±2.5%F.S.)
Alarm contact	1) Reed Switch (R-75□-□) 2) Optical Switch (R-76□-□)