O3000

คุณสมบัติสินค้า:

เพิ่มรายการโปรด

เปรียบเทียบ

แบรนด์ : TOKYO KEISO

Features

Cost effective
- The measuring method using an orifice plate enables the measurement of flow rates in medium- to large-size main pipes at low cost.
Omni-direction support (except O3□□□- AP)
- Supports all directions from bottom to top, top to bottom, left to right, and right to left.
HART® communication
Explosion-proof
- Certified by TIIS, KOSHA, NEPSI, ATEX and IECEx.
Indicator protection category: IP67

Short Specifications

Fluid	liquids (up to viscosity 3 mPa·s) gases in general (not suitable for slurry and steam)
Flow range	water (density 1.0g/cm³, viscosity 1.0 mPa·s) Max.: 64 to 1000 m³/h (Diff. pressure: 50 kPa) Min.: 0.27 to 1.8 m³/h (Diff. pressure: 30 kPa) air (0℃, 1 atm) Max.: 1700 to 26000 m³/h(nor) (Diff. pressure: 50 kPa) Min.: 5.5 to 53 m³/h(nor) (Diff. pressure: 40 kPa)
Accuracy	±5%F.S.
Temperature	−20℃ to 120℃ (general type) −20℃ to 200℃ (high-temperature type)
Pressure	up to 2 MPa
Process connection	Screw connection: Rc tapered female thread and NPT female thread, pipe size: 15 A (1/2") to 100 A (4") Flange connection: JIS5KFF/10KFF·RF/20KRF, ANSI/ASME/JPI class:150/300RF, pipe size: 15 A (1/2") to 300 A (12") Wafer connection: JIS5K/10K/20K, ANSI/ASME/JPI class: 150/300, pipe size: 15 A (1/2") to 300 A (12")
Tube material	Screw connection: SCS14 Flange connection: SUS304、SUS316、SS400/SGP Wafer connection: SCS14、SUS304、SUS316、SS400
Construction	Non-explosion-proof Flameproof Intrinsic safety
Output	4 to 20 mA DC (electric transmitter, HART^® communication)